IMMERSION COOLER
Immersion cooler TK-Z 1.7 and 2.7 hp
with cylindrical evaporator
(available with and without heat recovery)
Excellent technique through years of experience guarantees the highest durability, excellent cooling performance and low power consumption.
Type:
- The electronic milk thermostat ensures a constant milk temperature. It is continuously variable.
- The LISTER-milk agitator supports even the slightest amount of milk and guarantees gentle treatment of the milk.
- The agitator motor is vacuum-proof, protected by winding thermostat and ball bearings.
- LISTER-immersion coolers are supplied as standard with a digital temperature display.
- A clock technology prevents the creaming of the milk.
- Retrofitting a heat recovery system is possible.
- Immersion coolers with cylindrical evaporator are also available in compact design with heat recovery.
- The refrigerant R 134a is used.
Further applications:
- Brine cooler
(For the cooling of brine, the housing of the unit is also available in stainless steel) - Immersion cooler for the industry
For cooling of water or emulsions
Technical specifications:
Type TK-Z | Voltage [V] | Drive power* [PS] / [kW] | Cooling capacity [kW] / [kcal/h] | Immersion length [mm] |
---|---|---|---|---|
1.7 | 230 | 1.7 / 1.25 | 2.4 / 2064 | 760 or 960 |
1.7 | 400 | 1.7 / 1.25 | 2.5 / 2064 | 760 or 960 |
2.7 | 400 | 2.7 / 2.0 | 4.1 / 3526 | 760 or 960 |
Condensation temperature: 55°C
Evaporation temperature: 0°C
![](uploads/cms/foto_tauchkuehler_tkz.jpg)
Immersion cooler
TK-Z 1.7 & 2.7 hp
Immersion cooler TK-R 1.7 and 2.7 hp
with coiled tube evaporator
(available with and without heat recovery)
Lister sets new standards in modern milk cooling technology
Type:
- All LISTER-immersion coolers are fitted as standard with a digital temperature display.
- The electronic milk thermostat ensures a constant milk temperature. It is continuously variable.
- A clock technology prevents the creaming of the milk.
- The very slow speed agitator (48 U / min) ensures a very gentle milk treatment (no churning appearance and no foaming).
- No ice accumulation at 4 ° C milk temperature and 5 ° C ambient temperature.
- All parts in contact with milk are made of stainless steel (1.4301). The welds are made clean and smooth.
- Retrofitting a heat recovery system is possible.
- Immersion coolers with roll wend-evaporator are also available in compact design with heat recovery.
- Use it even with small amounts of milk.
- The refrigerant R 134a is used.
Further applications:
- Brine cooler
(For the cooling of brine, the housing of the unit is also available in stainless steel) - Immersion cooler for the industry
For cooling of water or emulsions
Technical specifications:
Type TK-R | Voltage [V] | Drive power* [PS] / [kW] | Cooling capacity [kW] / [kcal / h] | Immersion length [mm] |
---|---|---|---|---|
1 | 230 | 1.7 / 1.25 | 2.4 / 2064 | 760 or 960 |
1 | 400 | 1.7 / 1.25 | 2.4 / 2064 | 760 or 960 |
2 | 400 | 2.7 / 2.0 | 4.1 / 3526 | 760 or 960 |
Condensation temperature: 55°C
Evaporation temperature: 0°C
![](uploads/cms/foto_tauchkuehler_tkr.jpg)
Immersion cooler
TK-R 1.7 & 2.7 hp